Written by Randy Fox
Saturday, 03 November 2007
Page 1 of 3
This article is one of a series which describes how to disassemble, work on, and reassemble the Road Star engine. This particular highlights how to finish putting the rest of the bike back together. See the Complete Engine Tear Down, Orientation article in this website for details of other aspects of engine details.
Be sure you refer to the service manual through all phases of this project.
Installing the Cam Cover
The cam area can now be finished. See photo below.
Slip the remaining two, little, solid, alignment dowels into the cam cover.
Install the outer cam cover gasket.
Bolt up and torque the chrome, outer cam cover (aka decompression cover). Use 7.2 ft-lbs, which is 86.4 in-lbs. Also install, bolt up, and torque the decompression solenoid cover using 7.2 ft-lbs.
Copyright 2003-2007 Road Star Clinic and its respective authors.
The Road Star Clinic
is a collaborative community of riders who archive and publish user contributed technical
data about Yamaha Road Star motorcycles.
We also sponsor the creation and support of other community websites similar to our own. Inquiries
about availability of a website for your community can be submitted to us via any "Contact Us" option
on the Clinic.
Road Star Clinic is sponsored by the folks at MLSHomeQuest.com