|
Dyna 3000 Switch Settings |
|
|
Written by Jim Travis
|
|
Thursday, 10 June 2004 |
|
|
Dyna 3000 Switch Settings
Reprinted by permission, from Road Star Magazine |
If you have installed a Dyna 3000 on your Road Star there is a little tip about how you can cut a hole in your battery case so you have easy access to the dip switches to change the Dyna's settings. Problem is, after doing this you can't see the mud map for the switch settings. So thanks to Jimtec of the Road Star Riders Forum here is a photo of the back of a Dyna 3000 for you to refer to or print out.
THE CURRENT SETTINGS IN THE IMAGE MAY NOT BE THE RECOMMENDED SETTING
FOR YOUR ROAD STAR, THE IMAGE IS ONLY A GUIDE
Click on the image for a larger version then print it out
 |
Copyright © by RoadStarMagazine.com All Right Reserved.
Questions should be asked in our forum (Use discuss link below).
The forum is very active and you stand a good chance of getting your questions
answered there. If you would like to leave feedback
for the author, or have additional information you think will benefit others, please use
the comment section at the bottom of this page.
Discuss this article on the forums. (5 posts)
DISCLAIMER:
This information and procedure is provided
as a courtesy and is for informational purposes only.
Neither the publishers nor the authors
accept any responsibility for the accuracy, applicability, or
suitability of this procedure. You assume all risks associated
with the use of this information. NEITHER THE PUBLISHERs NOR THE AUTHORs
SHALL IN ANY EVENT BE LIABLE FOR ANY DIRECT, INDIRECT, PUNITIVE, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OF ANY NATURE ARISING OUT OF OR IN ANY WAY
CONNECTED WITH THE USE OR MISUSE OF THIS INFORMATION OR LACK OF INFORMATION.
Any type of modification or service work on your motorcycle should
always
be performed by a
professional mechanic.
If performed incorrectly,
this procedure may
endanger the safety of you and others
on your motorcycle and possibly
invalidate your manufacturer’s warranty.
 Quote this article on your site | Views: 12795
Written by heferwiz57, on 07-21-2008 20:20
My passing lamps went out on 06 RS Silverado. What is the deal? |
dyna 3000
Written by cruzertim, on 04-23-2007 14:38
If you go to Dynatech's website www.dynaonline.com you will find that only the 2005 Roadstar has the passing lamp problem. |
dyna 3000
Written by maddog200_0, on 02-14-2007 11:05
If you have add H/C piston,s where would the best setting be at on your Dyna 3000?
All so does the Retard switchs need to be set? |
dyna 3000
Written by Wildstar1600, on 02-02-2007 18:57
I have a 2002 wildstar.do somone have picture of mounting it  . |
Issues w/ Silverado
Written by Stir.Crazy, on 10-26-2006 14:11
I have heard there are issues w/ the Dyna 3000 when using it w/ the Silverado and passing lamps. Does anyone know of the problem or a work around for the problem? |
Only registered users can write comments.
Please login or register. Powered by AkoComment Tweaked Special Edition v.1.4.6
AkoComment © Copyright 2004 by Arthur Konze - www.mamboportal.com
All right reserved
|
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
......................................................................
-->
Comments (5)
